Plugs for 1.0" to 1-1/8" Diameter Drill Holes or Hose Cleaners 1,000 ct. 12" square Box
 
Foam Poly Plugs by Pest Boys are mainly used by pavement mudjacking and slab leveling technicians. Their sole purpose is to support patching materials until cured. They are much more econnomical than wooded plugs currently being used by some firms. These plugs will not fall through 1.0" holes. Some firms may even use these plugs as hydraulic hose cleaners for light debris and/or dirt build up inside of hoses prior to installation of hoses. 
 
Order the plugs for what size the drill holes are in slabs or hose inside diameter.
 
First, technicians must clean drill holes with water or wire brush to remove any contaminates after materials have been injected so patching materials can bond with side walls properly. Next, install plug to desired depth. Finally, pour patching material in hole to cure and seal.
 
If plugs are to be used as Hose and/or Pipe Cleaners, take three (3) plugs and use compressed air to blow plugs through hose, one plug at a time, a minimum of three (3) times. These plugs will not remove corrosion in pipes or hoses. Pipes or hoses with signs of corrosion or heavily soiled are recommended to be replaced, not cleaned.